1-800-965-5323

Our areas of expertise include all facets of environmental and safety regulations, from general reporting activities (Form R, Sara Tier II, Hazardous Waste) and safety procedure development, to permitting, audits, training, site investigations and remedial services.

Call us today at (262) 654-7020 for help with any of your compliance needs or send an email to EHS@chemreport.com for a free evaluation of how we can assist you. 

	Compliance Help
		In addition to MSDS Management Services, our consulting and engineering division provides comprehensive EH&S services to a diverse client base of small and large industrial and commercial facilities, including many Fortune 500 companies such as General Electric, Snap-On Tools, United Technologies, DaimlerChrysler, Yamaha, Rayovac, PPG and Lafarge Corporation. We also provide services to school districts, universities, utilities, municipalities, law firms, banks, real estate agents and hospitals.

Free Downloads

Regulatory Compliance Reporting

We prepare Form R, Tier II and Hazardous Waste reports for small, medium and large corporations with multiple locations situated across the United States. We include complete documentation packages as to how these reports were completed and provide easy to understand summaries of the data that was compiled. See an example of a summary report provided for a large chemical manufacturer with multiple locations by clicking on the PDF icon to the right.

Phase I & II Environmental Site Assessments

We routinely provide Phase I & II ESAs for banks, real estate and law firms that include a wide range of properties from industrial and commercial facilities to agricultural and subdivision development sites. We also review other consultant's reports to evaluate their findings in order to render an expert opinion on the environmental conditions of the property.

Risk Management Plans

Developed and updated risk management plans for the largest coal fired Power Plant in the Midwest for ammonia use in a Selective Catalytic Reduction (SCR) system. This included a complex Process Hazard Analysis that was completed on custom software designed for this project. Prepared RMP and Process Safety Management Plans for chlorine and sulfur dioxide use at sewage treatment and drinking water facilities.

Spill Prevention Countermeasure and Control Plans (SPCC)

Developed comprehensive SPCC Plans for chemical manufacturer, brass foundry and oil terminal. We also provided engineering guidance and specifications on the controls that needed to be constructed such as loading and unloading spill containment areas and truck pads.

Site Investigations and Remediation

Conducted numerous site investigations for Brownfield development, chemical spills and for environmental conditions discovered as a result of a Phase I or II ESA. Projects include hazardous waste landfills, gas stations, industrial and commercial properties and new construction. We successfully investigated and remediated a former automobile manufacturing property for use as an elementary school which was the first school in the nation to be constructed on a Brownfield property and assisted our client with obtaining pollution liability insurance to mitigate any future liability associated with the property.

UST Removals

As certified site assessors and professional geologists and hydrogeologists, we have completed a number of large tank removal and remediation cleanup projects including the removal of 17 USTs from a large industrial complex, 2 ASTs containing over 250,000 gallons of fuel oil and the removal of old railroad cars containing No. 6 Fuel Oil.

Air Permitting

We have successfully prepared air construction and operation permits for a wide variety of facilities including boat manufacturers, chemical plants, schools and universities and numerous manufacturing facilities. These include State Operating Permits and Federal Title V permits, including the development of MACT compliance strategies for our clients.

Stormwater and Wastewater Permitting

Evaluation and development of Best Management Practices (BMPs) for inclusion in Stormwater Pollution Prevention Plans required as part of the Stormwater Permit for our clients. Successfully negotiated less stringent permits for our clients who have implemented recommendations to prevent stormwater contamination. Obtained categorical wastewater discharge permits for chemical manufacturers, electro-platers and foundries.

Floodplain Permitting

Our geologists and engineers have successfully obtained floodplain permits for our clients to construct new facilities that are located in designated floodplains, including one facility that is used as a cement distribution terminal. Also obtained similar permits for remedial activities involving the removal of contaminated soils from a hazardous waste landfill that was located in a floodplain which required remedial actions.

Contingency Planning

Successfully incorporated RCRA contingency plans, OSHA Emergency Action Plans, Stormwater Pollution Prevention Plans and DOT HazMat Security Plans into a single document as allowed under the Integrated Contingency Plan (ICP) guidelines for a number of our clients.

Compliance Audits

Our team of professional consultants conduct a large number of environmental audits to determine our client's compliance status with the complete spectrum of applicable regulations. From simple summary assessments to complex audit reports, we have evaluated in excess of 100 facilities, many of which were performed as part of a pre-acquisition due diligence investigation.

Plant Closures and Decommissioning

ChemReport has managed the complete closure, decommissioning and cleanup of numerous facilities, some in excess of 1,000,000 square feet of floor space spread across 40 acres. Activities included sampling; waste disposal; cleaning of confined spaces; wastewater plant decommissioning; permit cancellations and/or transfers; tank and PCB transformer removals and the burning off of residual propane left in storage tanks that was too old to be recycled. All of our activities are documented in a Plant Closure Report.

ISO 14001

Conducted gap analysis of our client's existing environmental programs with those that are required by regulation and the ISO 14001 Standard. Developed the necessary policies and procedures needed to ensure that our clients can self-certify themselves as being ISO 14001 qualified or for 3rd party certification.

TSCA Compliance

Assisted numerous clients with the removal of PCB transformers (up to 50,000 lb units) and capacitors. Removed and tested over 1,200 PCB capacitors from an industrial facility and tested the area to determine if contamination existed. We assist clients with PCB Transformer identification and EPA registration. Additionally, we also prepare Pre-Manufacture Notices (PMNs) and FIFRA applications as a specialty service.

Hazardous Waste Disposal

From Lab-Packs to routine waste disposal, we provide cost competitive disposal and recycling activities for all types of wastes. We have established brokering accounts with the nation's largest TSDFs that enables us to save you money by having us manage your waste. These brokering accounts are typically less than what you would pay for the same waste because we can offer the TSDF much larger volumes.

MSDS Authoring

From product development to existing MSDS reviews, ChemReport can prepare a comprehensive MSDS document for your products. As professional consultants, we include all pertinent environmental and DOT information on the MSDS and provide information for various State right-to-know programs such as New Jersey, Pennsylvania and California's Proposition 65. A recent manufacturer of both a consumer and industrial cleaning agent contracted us to develop the MSDS documents, product labels, and consumer packaging information for their product.

Training

We excel in providing stimulating and informative on-site training programs and have trained in excess of 20,000 employees nationwide. We provide training in all OSHA, EPA and DOT requirements including, but not limited to; Hazard Communication, HAZWOPER First Responder (8 Hour), Chemical Hygiene Plans, Personal Protective Equipment, Lockout/Tagout, Confined Spaces, Hearing Conservation, Bloodborne Pathogens, Hazardous Waste, and DOT Hazardous Materials & Security. Class sizes are unlimited as we also perform seminar style training for large groups of employees. Our trainers are available 24/7 to meet all of your training needs. For large training projects, we provide a summary of the attendee's evaluation of the instructor and the program that was presented. Click the PDF icon to the right to view an example summary report.

Safety Manual Development

ChemReport can develop a complete safety manual for your facility for a fraction of the time and cost it would take to complete in-house. After performing an informal audit of your facility, we then sit down with you and obtain pertinent information needed to write the safety policies. We have completed comprehensive safety manuals for industrial facilities, school districts and entire counties. 

Chemical Hygiene Plans

We have developed comprehensive Chemical Hygiene Plans for businesses, municipalities and school districts. Some with as many as 185 different locations. One recent school project required us to inventory all existing products and chemicals at 185 different locations. We then assisted the CHP Committee in determining which chemicals and products were no longer needed and developed an Authorized Use List (AUL). Following the disposal of the unwanted chemicals, we developed a customized MSDS database that could be accessed on the school's Intranet. We then provided training of all the employees via a custom Internet training application.

Process Safety Management

Having developed numerous PSM programs for our clients, we are well versed in developing these programs for numerous chemical substances and integrating the PSM program with EPA's Risk Management Plans for facilities that are required to have both programs in place.

Industrial Hygiene Monitoring

From noise exposure testing and particulate exposures to evaluating exposures to organics and metals, we can fulfill all of your industrial hygiene monitoring requirements. We recently concluded mercury exposure testing at a nationally known waste treatment facility that was used as basis for promulgating regulations that affected the mercury recycling industry.

Specialty Programs

If it involves safety, we can do it. One recent project involved the development of specific lockout procedures for all of the equipment located in each of 36 different facilities. We then entered the procedures into a database. The database was merged with the facility's maintenance management software so that LOTO procedures are now automatically printed out on all service and work orders generated by the maintenance program.